Watertight luminaires, the integrated LED is an advantage

Watertight luminaires, the integrated LED is an advantage

Watertight luminaires with protection index to illuminate warehouses, car washes and industrial areas.

What is the main advantage of watertight luminaires

The necessary characteristic of products suitable for this type of environment is the IP65 protection index, which prevents the potential damage to lighting solutions caused by external agents such as water and dust. These products are commonly referred to as watertight ceiling lights. Peering through the assortment of Lamp Direct, we find some products of the Coreline family and of the brand. These ceiling lights are equipped with an integrated LED circuit.

How to replace the traditional ceiling lights for fluorescent tubes with modern LED ones

It's very simple. Visiting the category Waterproof IP65 luminaires, you will find watertight appliances such as LED Waterproof Batten 60W 6600lm 4000K 1560mm incl. wiring (2x58W equivalent). As the name suggests, this product replaces your traditional watertight ceiling light with 2 TL-D 58W fluorescent tubes each. If you are attentive to quality and detail, the luminaires are fitted with a driver, a further guarantee of long life, and are covered by a total warranty of 5 years Direct Lamp.

Is it possible to buy only the light tube

If you only want to replace the tube, there are watertight luminaires for LED tubes that do not have a reactor inside. Therefore they are not compatible with traditional fluorescent tubes. You will find these devices here. As tubes, all those equipped with LED technology that has a 220-240V supply voltage, such as LED tube Value, are recommended. InstantFit pipes should be avoided as they require a supply voltage lower than the standard one. It is important to make sure you check the security index. Replacing the traditional watertight ceiling lights has never been so advantageous.

Standard watertight device

  • Energy savings up to 50%
  • Duration up to 50,000 hours
  • Protected against dust and liquids
  • Protected against accidental damage
  • Color temperatures: cold white and daylight
  • Available lengths: 60, 120 and 150 cm
  • Substitutes 2x18W or 2x36W
  • 3 year warranty

CoreLine waterproof device

  • Energy savings up to 50%
  • Duration up to 50,000 hours
  • Protected against dust and liquids
  • Protected against accidental damage
  • Color temperatures: cold white
  • Available lengths: 60, 120 and 150 cm
  • Substitutes 1x18W, 1x58W, 2x36W and 2x58W
  • 5 year warranty

DampProof LED watertight appliances

  • Energy savings up to 58%
  • Duration up to 50,000 hours
  • Protected against dust and liquids
  • Protected against accidental damage
  • Color temperatures: cold white and daylight
  • Available lengths: 120 and 150 cm
  • Substitutes 1x18W, 1x36W, 1x58W, 2x36W and 2x58W
  • 5 year warranty

Pro watertight appliances

  • Energy savings up to 50%
  • Duration up to 70,000 hours
  • Superior protection against dust and liquids
  • Protected against accidental damage
  • Integrated through wiring
  • Color temperatures: cold white and daylight
  • Available lengths: 60, 120 and 150 cm
  • Substitutes 1x18W, 1x36W, 1x58W, 2x18W, 2x36W and 2x58W
  • 5 year warranty

Comments

Post a Comment

Popular posts from this blog

How to switch to LED with 60x60 ceiling lights

 How to switch to LED with 60x60 ceiling lights Why replace the old 60x60cm ceiling lights Today switching from traditional lighting technologies to LED solutions is very easy. For many cases, it is sufficient to simply replace the lamp that is currently installed with the new LED alternative. This applies to the classic incandescent, halogen, spotlight bulbs, for most fluorescent tubes. Most of it? Yes, because there is a particular case in which the transition to the new technology is not so immediate. We are talking about the case in which the fluorescent tubes are installed in 60x60 ceiling lights, or ceiling lights that house 4 T8 18W neon tubes 60cm long. Offices, hospitals, public buildings are the places that make the most of this lighting solution. And considering that these buildings keep the lighting running for several hours a day, energy consumption sometimes skyrockets. For this reason, the transition to innovative LED technology is increasingly considered. How ...
Read more

How to install LED tubes in an existing system

How to install LED tubes in an existing system Are you using T8 fluorescent tubes and want to replace them with LED tubes, but you don't know how to proceed? Here's how! Real and significant energy savings Investing in efficient resources in terms of energy saving is moving from being a simple idea to a real lifestyle. One of the most adopted solutions to reduce consumption and costs is the possibility of installing LED lighting in your own environment. But if for many cases the transition to the new technology takes place through the simple and rapid replacement of the bulb, to replace the fluorescent tubes an important detail must be considered: is your ballast electronic or conventional? How to install LED tubes in fixtures with conventional drivers If your current lighting system works with a conventional or ferromagnetic ballast, then the replacement is very simple. The procedure is as follows: 1. Buy LED tubes with starter included 2. Remove the fluorescent tu...
Read more

How to choose the correct LED bulb

How to choose the correct LED bulb Ecological advantages, energy savings, and cost savings switching to LED is the solution! Investing in efficient resources in terms of energy saving, from being a simple idea is turning into a real lifestyle. "Going Green" is not a walk, on the contrary. It involves dedication and commitment, sometimes even an economic outlay that we don't always include in the priority list. However, there is a solution, today one of the most common, to adopt an ecological line that helps us to amortize expenses without investing all our assets: switch to LED. How can the correct LED alternative be chosen To begin with, the first step is to see if the attack of our traditional light bulb exists with LEDs. The new lighting technology covers most of the attack spectrum, or at least the most common. If the attack exists, it is often enough to remove the traditional incandescent, halogen or fluorescent bulb and install the new LED product. How to s...
Read more